JetBoots PRO PlusUpdated a month ago

Shop JetBoots PRO Plus

Wireless compression boots with infrared LED and vibration therapies 

Key Product Features

• 3-in-1 therapies to maximize recovery
• Fully wireless — no external pumps or hoses to connect to
• Scientifically-designed routines
• Precise, safe treatments tailored to you
• Inflates and deflates in as little as 60 seconds

What's included in box?

• JetBoots PRO Plus device (2 pneumatic compression boots with integrated pumps)
• Power adapter
• Splitter cable
• Travel bag

Using Your Device

Putting On Your Device

• It is recommended that you wear shorts while using the device to allow the device to contact your skin directly. 
• Reach a comfortable position, either sitting upright or lying down with your legs straight and feet elevated. 
• Unzip the boots completely and place each leg and foot inside each boot. Your legs should be in the center of each boot; keep them in between the infrared LED lights as a reference point. Your feet should be as close to the bottom console as possible. 
• Zip up the boots and keep them flat. Keep your legs straight and flat to prevent kinks and folds. 
• Only hold the boots’ edges when handling them. Avoid holding the device from the internal layer. Zip both boots up 

DO NOT use the device while standing or walking. 

Begin Your Treatment

• Turn on the device. To turn on your device, press and hold the center button on the control panel of the lead boot. The LCD screen on the control panel will light up when the lead boot is on. Press and hold the button on the support boot to power it on. The button will illuminate when the support boot is powered on. Each boot will vibrate as it powers on. The boots will connect to each other via low power Bluetooth once they are both powered on.. Once connected, a two-boot and battery icon will display on the LCD screen. 
• Select your treatment. Toggle through several preset treatment options using the up and down buttons: Quick Start, Warm-up, Recovery, Lower Leg, Upper Leg, Knee, Joint Therapy, Pain Relief, and Sleep Prep. Press the center button on the control panel to select your desired treatment. The treatment will automatically start when a preset is selected. In Quick Start, you will be asked to select the pressure settings to start the treatment. 
• Pneumatic compression. Pressure options are offered in 5 mmHg increments from 20-100 mmHg in Quick Start mode. Toggle to your desired pressure settings and select by pressing the center button on the control panel. The pressure setting used in your last treatment will become the default setting for your next treatment only in Quick Start. You can also add or subtract pressure during your treatment if desired, but the pressure range may be limited depending on your selected preset treatment. The preset treatments have purpose-designed pressure settings for an optimal treatment experience. 
• Start, pause, and exit treatment. Start your treatment by either selecting a preset treatment or entering Quick Start mode and selecting a pressure setting. Pressing the center button at any point during your treatment will pause the treatment. Press the center button again to resume the treatment. To exit the treatment, first pause and toggle up to the left arrow icon and press the center button to select. 
• Treatment time. Each preset treatment has a purpose-designed treatment time for an optimal experience. You can modify the session time once the treatment has started by toggling to the time icon and using the up and down arrows. Treatment durations are offered in five-minute increments from 10-60 minutes or fixed depending on the preset. You can also add or subtract time during your treatment. Your last time setting will become your default setting in Quick Start. 
• Infrared LED light therapy. Toggle to the Infrared LED light therapy icon using the left and right buttons to add it to your treatment (though it is included in many preset treatments). You can turn off Infrared LED light therapy at any point during your selected treatment by toggling down to OFF. Infrared LED light therapy will automatically shut off after receiving the appropriate dosage (45 minutes maximum) during all treatments. The preset treatments have a purpose-designed recommended LED light therapy for an optimal experience. 
• Vibration therapy. You can add vibration therapy to Quick Start and preset treatments. Toggle to the vibration icon to add it to your treatment. To select your desired settings, toggle between the three vibration intensities: low, medium, and high, or turn it off if desired. The preset treatments have a purpose-designed recommended vibration therapy for an optimal experience. 
• Turn off the device. Press and hold the center button on the control panel to turn off the device. Turning off the lead boot will also turn off the support boot. The device will automatically shut off after 10 minutes of inactivity when the treatment is paused, or 3 minutes after the treatment is completed. 

Charging and LED Indicator Guide

• The battery status of both boots is displayed on the top right corner of the control panel on the lead boot. 
• Plug one end of the power adapter into a wall outlet and connect the other end to the splitter. 
• Connect both cables on the splitter to the charging port on each boot. Lift the rubber cover located on the right side of each foot to access the charging ports.
• The device can be used while charging, but the battery level may not increase while the device is in use. Turn off the device to expedite the charging process. 
• The control panel will display the battery icons with a bolt to indicate that the lead and/or support boot are charging. Note that the support boot also indicates its battery status using the color of the center light: a. While not charging: >30% battery (white) and <30% battery (orange) b. While charging: >90% battery (solid green if charging only, solid white if in use and charging) and <90% battery (flashing orange) 6. Battery life of the device: a. Battery life on high use: 140 minutes b. Battery life on low use: 270 minutes 

Note: If using an alternative power adapter or splitter cable, ensure that it is from a trusted source and has not suffered any structural damage. Previous RecoveryAir model’s power adapter and splitter are not compatible with the device. 

Care and Cleaning

This product is NOT waterproof. Do not submerge the device in water or clean it under running water. Do not allow the device to come into contact with corrosive solutions, which can damage the device’s appearance and function. 

The device contains medical-grade material covering the internal chamber to help reduce the potential for microbial growth and moisture retention and limit the potential for bacterial transmission. 

• Unzip the boots completely and lay them on a flat surface. 
• Use a 70% isopropyl alcohol (IPA) cleaning solution to gently clean the inside of the boots. Never use oil-based cleaning products. Avoid applying pressure when cleaning the internal surface of the boot. 
• Wipe down the device’s exterior using a soft cloth that is free of debris to reduce surface contaminants. 
• Ensure there is no remaining debris after fully cleaning the device. 
• Once you have fully cleaned the device, fully pat dry the surface and hang to dry completely before continuing use. 

Specifications

User Manual

JetBoots PRO Plus User Manual